eeschema (2011-01-28 BZR 2765)-stable  >> Creation date: Tue 21 Apr 2015 15:00:09 PDT

#Cmp ( order = Value )
| 10K          RR1       ; 9 res. bussed            
| 220          RP1       ; 9 res. bussed (up to 1K OK)            
| 470          R1,R2     ; 1/8 w. 470ohm (value may vary)           
| 0.1uf        C2-C34    ; decoupling cap., monolithic or ceramic           
| 22uf         C1        ; 22uf-47uf electrolytic        
| 74LS00       U3        ;             
| 74LS02       U1        ;             
| 74LS04       U6,U19    ;             
| 74LS06       U10       ;             
| 74LS08       U2        ;             
| 74LS10       U25       ;             
| 74LS138      U18,U24   ; 16-pin      
| 74LS139      U9,U11,U12; 16-pin      
| 74LS244      U13,U14   ; 20-pin      
| 74LS245      U22       ; 20-pin      
| 74LS27       U4        ;             
| 74LS32       U5        ;             
| 74LS646      U7,U8     ; 24-pin 0.3" 
| 74LS74       U15       ;             
| 74LS85       U17       ; 16-pin            
| 74LS86       U16       ;             
| C96ABC       K4        ; DIN 41612 rt.angle male 96-pin connector
			 ; Jameco #859430
| CONN_13X2    P7        ; dual row 26-pin (13x2) jumper block
| CONN_17X2    P8        ; shrouded male floppy connector 34-pin ** 
| CONN_2       P3,P4,P6  ; 2-pin jumper block            
| CONN_20X2    P1        ; rt. angle connector 40-pin     
| CONN_20X2    P2        ; shrouded male IDE connector 40-pin    
| CONN_25X2    P9        ; optional 8" floppy connector 50-pin **  
| CONN_3       K1,K2,K3,K5  ; 3-pin jumper block
| CONN_3X2     P5        ; dual row jumper block            
| LED          D1,D2     ; 3mm or 5mm LED            
| OSC 16.000   U21       ; 16Mhz full or half can oscillator           
| WD37C65BJM   U23       ; PLCC-44, chip "B" revision (alternate: WD37C65CJM "C" revision)
#End Cmp

*   IC's are 14-pin, unless otherwise noted; width 0.3" all
**  Install either P8 or P9; both may not fit